Press and move to zoom.
Mouse over image to zoom.

Binary Media Distribution


SKU: B-520-EXT-330-HV
Status: Clearance 3 In Stock
Sold Per: Each
Web Comments: Clearance and Discontinued items are Final Sale and excluded from our Returns Policy.


This Binary Single Cat-5 extender proves that one extender really can meet all your needs. With just one cat-5/5e/6 cable, send either HDMI or VGA with Stereo Audio signals over distances up to 330ft (100 m). As a bonus, this extender can be used in either light commercial or heavy residential, as it supports bi-directional IR, RS-232 and IP over a single category cable. You can even use the dip switch setting to set the priority of HDMI or VGA based on the Conference room applications.

Package Contents
  • (1) HDBaseT Extender Transmitter as in-wall
  • (1) HDBaseT Extender Receiver
  • (1) 12V Power supply
  • (2) Rack ears
  • (4) Screws
  • (4) Rubber feet
  • (1) Dual gang wall plate
  • (2) HDBaseT Label


Digital Video Image Scaling

Connect laptops to a projector or a television without worrying about a distorted image! This extender converts VGA signals into digital form and delivers a full, unskewed picture, no matter what size screen clients are using. It’s capable of extending either HDMI or VGA up to 330 ft.

Stereo Audio Input + 3 Dip Switches

For clients who need audio to come out of the mic even with an HDMI TV, the stereo audio input converts audio from a VGA source to an HDMI signal output. Three dip switches can also be used to control the audio, depending on whether you’re using VGA/an external source or the digital signal available on the HDMI input. A dip switch table built specifically for this B-520 helps select the priority source for audio settings, allowing for an easier setup.

In-Wall Transmitter

An in-wall dual gang transmitter eases installation, whether you’re working under the conference room table or installing in the wall. A basic white decora plate is included, but you can swap it out for whatever color matches the install.

Need More Powering Versatility?

To simplify the install even further, you can use a single power supply for both the transmitter and receiver. Just purchase our WPS-ACC-PWR-F and WPS-ACC-PWR-1X2.

IR Flexibility

Using the dip switch, you have the flexibility to provide power to an IR receiver when connected to an IR receiver, or shut power off when connected to control systems

Plenty Of Power Options

Since this extender pair features Power over Cable (PoC), you’ve got the ability to power the extender from either side – or even power it remotely if there's no outlet near your receiver. Everything you need is in the box! Grab the included removable screw terminal and the female power supply adapter, add a 16- or 18-gauge 2-conductor wire, and you're ready to go. Once you’re done, the power supply can easily go in a rack or another out-of-the-way place.

Bi-Directional IR, RS-232 and IP

Get no-hassle integration with a variety of control systems. Bi-directional IR, RS-232, and IP means you can easily send IR signals from the TV location back to cable boxes, DVD players, and other source equipment at the head end. All IR connections feature active circuitry that supports a wide variety of IR and control system types.

Easy Firmware Upgrades

You never know when a new TV or BluRay player is going to throw you a curve ball. Upgradable firmware gives our software team the ability to update the system to handle any “gotchas.” Just flip the switch on the RS-232 port and upgrade on-site.


HDMI Compliance HDMI 3D
HDCP Compliance HDCP 1.4
Supported Video Bandwidth 10.2 Gbps
Transmission Distance

Full HD 1080p 36-bit deep color: 330 ft (Cat5e/6/6a/7)

Full HD 1080p 24-bit color: 330 ft (Cat5e/6/6a/7)

1080i/720p 24-bit color: 330 ft (Cat5e/6/6a/7)

Transmission Distance - 4K/Ultra HD UltraHD 4K@30Hz (4:2:0): 115 ft (Cat5e/6), 130 ft (Cat6a/7)
ESD Protection (1) Human body model: ±15kV (air-gap discharge) & ±8kV (contact discharge) (2) Core chipset — ±8kV
Power Connection Type Transmitter: Latch-Locking; Receiver: Latch-Locking
Input DDC Signal 5V (peak-to-peak, TTL)
Input TMDS Signal 1.2V (peak-to-peak)
IR Signal Frequency Carrier frequency: 20–60kHz
HDBaseT Connections

Transmitter: 1 x RJ45

Receiver: 1 x RJ45

HDMI Connections

Transmitter: 1 x HDMI Type A (19-pin female)

Receiver: 1 x HDMI Type A (19-pin female)

IR Receivers 1x 3.5mm Stereo/Mono
IR Flashers 1x 3.5mmMono
RS-232 Ports

Transmitter: DB-9

Receiver: DB-9

Connector Type Transmitter: Ethernet; Receiver: Ethernet
DipSwitch 1 Controls IR RCVR PWR OFF/ON
DipSwitch 2 Controls RS-232 Pin Configuration (DCE /DTE)
DipSwitch 3 Controls Service/Link
DipSwitch 4 Controls Transm itter: VGA scaling (720p @60Hz / 1080p @60Hz)
Construction Metal enclosure
Power Consumption 12W (max)
External Power Supply 12V DC, 2A
Operating Temperature 32–104°F
Storage Temperature -4–140°F
Operating Humidity 20–90% RH (no condensation)

Product: CE, FCC, RoHS

Power Supply: CE, FCC, RoHS, UL

Dimensions (W x H x D)

Transmitter: 6.25 "x 3.1" x 1.3"

Receiver: 3.48" x 2.8" x 0.66"

Weight 1.1 lb